PS8 RED, -4°C/+4°C, 60G PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X.

PS5 TURQUOISE, -10°C/-18°C, 60G The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. Replaces CH5X

T80 Steel scraper Skarp og holdbar Steel scraper for experienced waxers.

PS10 YELLOW, 0°C/+10°C, 60G PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.

T266N FIBERTEX VIOLET, MED.COARSE Coarse Fibertex. Aluminum oxide Abrasive. Violet. 110 mm x 150 mm. 3 pads. To smooth out scratches in damaged bases. Uniform abrasive particle size for exact base surface finish. Finish with Orange Fibertex (T0264) and White Fibertex (T0266) to remove micro fibers. Details Violet 110 mm x 150 mm 3 pads

PS7 VIOLET, -2°C/-8°C, 60G PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X.

Wax remover and cleaner. Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solven­t capacity. Non-ozone depleting aerosol. 70 ml/2.5 fl.oz.

T160O BRUSH OVAL, FINE BLUE NYLON Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

Before hand-tuning your skis, make sure the bases are protected with Swix base-protect tape. At 50 millimeters wide, this thin and lightweight tape is applied to your skis’ bases prior to working with metal file guides, and helps prevent unwanted nicks or scratches. Swix base-protect tape is easy to work with, never leaves a sticky residue behind, and will keep your bases in race-ready shape through the edging process. Lightweight construction makes tape easy to work with while still remaining durable 50 mm width works with all alpine race skis Can be used to tape sidewalls during waxing

Pocketfile, For tuning steel edges, For recreation, Good price 87°and 88° Pocket size Side-edge and Base-edge Sharpener with 40 mm file, in one tool. Side-edge 88 and 89 degrees, and base edge 0.5 and 1 degrees.

Swix Plexi Scraper 4mm Scraper wider for Snowboards

Ski brush, For cross country and alpine skis, For all ski waxers, Good quality Preferred by some as first brush on wax in alpine. 10 strokes.

Plexi scraper, For snowboard, For all snowboard waxers, sharp and effective

Before waxing your skis or snowboard it is very important to remove any old wax and open the pores of the base to receive the new wax. This is best done with a few passes tip to tail with the Oval Coarse Bronze Brush. If you would like to maximize the use of each brush the Coarse Bronze brush can also be used as the first brush after waxing and scraping too. This brush by Swix is made with Course Bronze .18mm diameter bristles, along with a row of black nylon bristles around the outside edge as sweepers for wax particles. The Oval Course Bronze Brush has a convenient adjustable Velcro strap to secure your hand in place for easy use. Oval Paddle Brush with Hand Strap Best used before waxing to remove old wax and open the pores and base structure. Also can be used as a first brush after waxing and scraping. Swix Recommends: 10 passes before waxing to clean out the structure.