A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice. - Works with standard 3/8" tap handles and 9/16" pedal spindles - Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals - Aluminum construction - 20 TPI
Cannondale Headshok Adaptor for the SKS Shockboard Fender
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
Converts quill style forks to use threadless stems.
Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in
This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.
Add premium padded protection to your tailgate with Fox's Large Tailgate cover. It features a flap for easy access to the tailgate handle, and six webbing straps for easy attachment. Width: 62 inches
Perfect for keeping cables and cords tucked away or for attaching to your bike frame whatever you deem attachable, these handy Problem Solvers Zip Ties come packed 100 per box. - 2.5 x 200mm - Heavy-duty nylon material - 100 count per box
Light enough to make the backpacker’s cut, but robust enough for backyard luxury, the SingleNest is about the size of softball when packed. - Capacity: 1 person - Breathable quick drying nylon - Max Capacity: 400lbs - Attached compression stuff sack - Aluminum wire-gate carabineers - Open Dimensions: 9' 4" x 4' 7"; 16oz - Packed Dimensions: 3.5 x 4.5 - Hammock hanging straps must be purchased separately
The strand of 23 LEDs keep a hammock, tent, or campsite lit at night. - Twilights are not one, but a string of 23 LED lights to show the way - Powered by 3 AAA batteries (Not included) - Over 72 hours of burn time - Includes carry case with velcro closure - Length: 120 - Weight: 4oz
The Platypus QuickDraw Microfilter System draws upon decades of expertise in filtration and hydration to provide adventurers the best user experience of any fill-and-squeeze water filter on the market. The easy-to-use system comes in two parts: the durable and taste-free 1L QuickDraw reservoir and the hollow fiber filter cartridge. Weighing just 3.6 oz (101 g) and filtering up to 3L per minute, the QuickDraw system ensures quick and easy access to clean water on any adventure.
$19.99 - $34.95
The Air Head Lite Ultralight pillow fits in your pocket before inflating to provide big comfort at camp. - Four inches (10 cm) of air padding and stretch fabric can be customized to your preferred firmness
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose
Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces
$79.88 - $79.98
Our best selling protection just got better! One kit. Any bike. Give your bike the protection it deserves. The Hijinx™ 2.0 will fit any mountain bike frame and provide substantial scratch and light impact protection to keep it looking new. Available in gloss or matte finish, these transparent kits allow you to ride harder and worry less. Hijinx kits contain modular chips to extend protection where you want it. Large pieces include relief cuts that contour around frame curves to make installation a breeze. We analyzed more than 50 bike-specific kits to identify optimal shapes and sizes for each piece. Trimming may be required to fit some bikes, but we did most of the work for you. Be sure to add Shenanigans to protect your handlebars and fork lowers! Hijinx 2.0 kits provide the following features: *Substantial scratch protection for your carbon frame *Easy installation (no need to disassemble your bike!) *Dry, bubble-free application (just peel & stick, and easily reposition pieces to get the perfect fit) *Won't peel or yellow over time. *Lobster Tail Technology™ (LTT) relief cuts conform to curves *Wrinkle Avoidance Beans™ (WABs) prevent wrinkles around contours *Gloss or matte finish *Weight: less than 100 grams for a full kit *Proudly designed and produced in the USA (in Golden, Colorado) What's in the box: *Frame protection material to cover your top tube, down tube, head tube, seat tube, chain stays, and seat stays, plus bonus patches to place where you want *Each piece is labeled so you'll know what goes where *Quick Installation guide *Squeegee tool to assist installation
Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches
$9.99 - $11.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $10.49
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $11.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
Keep dust and water out of your headset with this easily attached wrap around neoprene cover.
$7.99 - $9.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection
- Three-color, brushed aluminum Park Tool logo sign measures 21" x 11-1/2" and has holes for hanging
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 5 straps, the Fox Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches. - Fits most mid-size/compact trucks - Premium padded tailgate protection - Flap for easy access to tailgate handle - Five webbing straps for attachment - Dimensions: 33.5" x 54" x 16" / 85.1cm x 137.2cm x 40.6cm
$22.99 - $24.99
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
PDW Power Stance Kickstand mounts to traditional kickstand mounting plates and offers adjustable length to ensure stable parking. - Stability in droves due to oversized foot - Max. load 25 kg - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Page 1 of 3 Next page